Peinture pour tableau | 400 ml

1. What surfaces can Chalkboard Paint be applied to?

This paint can be applied to wood, metal, plaster, drywall, MDF, glass, and other smooth surfaces to create a writable chalkboard finish.

2. What is the difference between the 400ml aerosol and the 500ml tin?

400ml Aerosol: Ideal for quick and easy spray application on small areas, craft projects, and detailed surfaces.

500ml Tin: Best for larger areas, such as walls, furniture, or doors, when applied with a brush or roller.

3. How do I apply Chalkboard Paint?

For Aerosol: Shake well, spray 8-12 inches (20-30 cm) from the surface in thin, even coats.

For Tin: Stir well, apply with a brush or roller, and allow each coat to dry before applying another.

4. How many coats are needed for the best results?

For optimal coverage and durability, apply at least 2–3 coats, allowing proper drying time between layers.

5. How long does the paint take to dry?

Touch dry: 30 minutes

Recoat time: 1–2 hours

Fully cured: 24 hours (recommended before using chalk)

6. Can I use liquid chalk markers on this paint?

Yes, but test in a small area first, as some markers may leave residue. Traditional chalk is recommended for easy erasing.

7. How do I clean the chalkboard surface after use?

Use a dry or slightly damp cloth to wipe off chalk. Avoid harsh cleaners that may damage the finish.

8. Is this paint safe for children?

Yes, once dry, it is non-toxic and safe for indoor use. Ensure proper ventilation during application.

9. Can this paint be used outdoors?

Yes! It is weather-resistant, but for outdoor use, a protective clear coat may help extend durability.

10. Can I repaint over Chalkboard Paint?

Yes, simply sand the surface lightly and apply a fresh coat of chalkboard paint or another type of paint as needed.

400ml Aerosol

1. For best results apply to primed surface
Ensure surfaces are clean, dry, sound and free of all surface contaminants. Shake thoroughly for at least two minutes and spray a number of light even coats from a distance of 25 – 30cm, until required coverage is attained.

2. Allow to dry
Allow sufficient time to dry, full cure after 24 hours.

3. Storage & Reuse
Upon completion of use, invert can and depress actuator to prevent nozzle blockage. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet for more information.

500ml Tin

1. Apply directly to a cool surface
Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with a maximum of 2 even layers, allowing 20 minutes to dry between layers.

2. Allow to dry
Allow at least 4 hours before use, full cure/hardness is obtained after 12 hours.

3. Storage & Reuse
Store out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet for more information.