Peinture en aérosol pour aluminium VHT | 400 ml

1. What is JENOLITE VHT Aluminium Spray Paint used for?

This high-temperature spray paint is designed for metal surfaces exposed to extreme heat, such as engine components, BBQs, chimineas, radiators, automotive parts, and other high-heat metal surfaces. It provides a durable, matt aluminium finish while protecting against corrosion and rust.

2. What temperature can it withstand?

Up to 650°C, making it ideal for automotive and high-heat applications.

3. What surfaces is it suitable for?

• Iron, steel, aluminium
  
• Automotive engine parts and components
  
• BBQs, chimineas, and radiators
  
• Interior and exterior metal surfaces exposed to heat
  

4. What finish does it provide?

A smooth, matt aluminium finish that is durable, heat-resistant, and corrosion-resistant.

5. Can it be used outdoors?

Yes. The paint is highly resistant to corrosion, rust, petrol, oils, and weather conditions, making it suitable for both indoor and outdoor applications.

6. How do I prepare the surface?

1. Ensure the surface is cool, clean, and free from grease or oil.
   
2. Remove any loose rust or old paint using a wire brush or steel wool.
   

7. How do I apply the spray paint?

1. Shake the can thoroughly until the agitator ball rattles.
   
2. Spray in smooth, even strokes from 15–30 cm away.
   
3. Apply a thin, even coat, repeating 1–2 times for full coverage.
   

8. How long does it take to cure?

Full cure is achieved once the paint reaches 260°C, ensuring maximum heat resistance and durability.

9. Can it be used on engine components?

Yes. It is commonly used on automotive engines and high-heat metal parts, providing a protective, heat-resistant coating.

10. Is it suitable for DIY use?

Absolutely. The aerosol format makes it easy for DIY enthusiasts and professionals to achieve a durable, heat-resistant aluminium finish.

11. How should I store the paint?

• Store in a cool, well-ventilated place out of direct sunlight.
  
• Invert the can and spray for 2 seconds after use to prevent nozzle blockages.
  

12. Where is it made?

Made in Britain, ensuring premium quality, durability, and reliable heat-resistant performance.

1. Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin even layer.

2. Allow to dry
Repeat the process 1-2 times to ensure that the whole surface has been covered. A full cure is achieved once the paint reaches 260°C.

3. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult Safety Data Sheet for more information.