Aérosol d'apprêt pour plastique | 400 ml

1. What is Plastic Primer Aerosol?

Plastic Primer Aerosol is a specially formulated spray primer designed to enhance the adhesion of paint to plastic surfaces. It helps create a smooth, durable base for topcoats and prevents peeling or flaking.

2. What types of plastic can this primer be used on?

It is suitable for a wide range of plastics, including polypropylene (PP), polyethylene (PE), PVC, ABS, and fiberglass. Always check the product label or test on a small area first.

3. Do I need to sand the plastic before applying the primer?

Light sanding with fine-grit sandpaper (e.g., 400-600 grit) can improve adhesion, but some primers are designed to bond without sanding. Refer to the product instructions for best results.

4. How do I apply Plastic Primer Aerosol?

Clean the plastic surface thoroughly to remove dust, grease, or wax.

Shake the can well for at least 1-2 minutes.

Hold the can about 8-12 inches from the surface and apply light, even coats.

Allow the primer to dry as per the manufacturer’s recommendations before applying the topcoat.

5. How long does it take to dry?

Drying times vary depending on temperature and humidity, but most plastic primers dry to the touch within 10-20 minutes and are ready for topcoat application in about 1 hour.

6. Can I use this primer on outdoor plastic items?

Yes, Plastic Primer Aerosol is suitable for both indoor and outdoor applications. However, for outdoor projects, ensure you use a weather-resistant topcoat for added durability.

7. Is this primer compatible with all types of paints?

Most plastic primers work with a variety of paints, including acrylic, enamel, and spray paints. Always check compatibility on the product label before use.

8. How many coats should I apply?

One to two light coats are usually sufficient. Avoid heavy application to prevent drips or uneven coverage.

9. Is Plastic Primer Aerosol waterproof?

While it provides a strong bond, it is not inherently waterproof. A weatherproof topcoat is recommended for items exposed to water or moisture.

10. Can I use this primer for automotive plastic parts?

Yes! It is often used on car bumpers, trim, and other plastic components before painting.

1. Apply directly to a cool surface

Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use. Apply sparingly from a distance of 20 – 25cm. Apply typically 2 to 3 coats or as necessary to achieve total and even coverage, leaving 10 - 15 minutes between each application.

2. Allow to dry

Allow at least 30 minutes to dry thoroughly before applying a topcoat. Suitable for use with both water-based and oil-based topcoats.

3. Storage & Reuse

To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult Safety Data Sheet for more information.

Plastic Primer MSDS