Back To Black Tyre Shine 500ml, Wet Look Tyre Dressing

1. What is JENOLITE Back to Black Tyre Shine?

JENOLITE Back to Black Tyre Shine is a specifically formulated tyre polish designed to restore faded tyres to their original deep black finish. It removes light scuff marks, enhances appearance, and provides a long-lasting wet-look shine that keeps tyres looking clean and new.

2. What does it do?

This easy-to-use aerosol restores, protects, and enhances tyre surfaces by:

• Rejuvenating dull and faded rubber
• Providing a deep, glossy finish
• Hiding scuffs and surface marks
• Protecting against weathering and road grime buildup

3. Is it easy to use?

Yes — the spray-on formula makes application quick and effortless.

There’s no need for rubbing or buffing; simply spray evenly on clean tyres and allow it to dry.

4. How do I apply it?

Step-by-step instructions:

1. Shake thoroughly before use.
2. Ensure tyres are clean and dry before application.
3. Hold the can 10–20cm away and spray evenly over the tyre wall.
4. Allow to dry naturally for a lasting, glossy finish.

• For use on window rubbers or exterior trim, spray onto a cloth and wipe over the surface to avoid overspray.

1. Avoid contact with braking surfaces.

5. Can it be used on other rubber or plastic trim?

Yes. It can also be applied to window rubbers, bumpers, and other exterior trims — simply spray onto a cloth and wipe the surface to avoid overspray.

6. Does it leave a greasy residue?

No. Once dried, it leaves a clean, non-greasy wet-look finish that resists dust and dirt buildup.

7. How long does the shine last?

JENOLITE Back to Black Tyre Shine provides a long-lasting glossy finish, depending on driving conditions and weather. Reapply as needed to maintain that freshly polished look.

8. Is it safe to use on all tyres?

Yes — it is suitable for all rubber tyre types and finishes.

Just take care to avoid spraying on tyre treads or brake components.

9. How should I store the can?

To prolong shelf life and prevent blockages:

• Invert the can and spray for 2 seconds after use to clear the nozzle.
• Store in a cool, well-ventilated area, out of direct sunlight and away from heat sources.

10. Where is it made?

All JENOLITE products, including Back to Black Tyre Shine, are proudly made in Britain, ensuring premium quality and reliability.

Step 1 – Clean the Tyre

Remove:

• Dirt
• Mud
• Brake dust
• Road grime
• Old tyre dressing

For the most even finish, start with a properly cleaned tyre.

Step 2 – Allow to Dry

Apply only to clean, dry rubber.

Step 3 – Shake Thoroughly

Shake the aerosol well before use.

Continue shaking periodically during application.

Step 4 – Apply to the Sidewall

Hold the aerosol approximately:

10–20cm

from the tyre.

Spray evenly around the:

TYRE SIDEWALL ONLY

Step 5 – Allow to Dry

Allow the product to dry naturally.

No hard rubbing or buffing is required.

Step 6 – Exterior Trim & Rubber

For:

• Window rubbers
• Exterior trim
• Bumpers

spray onto a clean cloth first and wipe over the surface.

This provides better control and reduces overspray.

Step 7 – Avoid Critical Areas

Never apply to:

• Tyre tread
• Brake discs
• Brake pads
• Braking surfaces

Step 8 – Clear the Nozzle

After use:

• Invert the aerosol
• Spray for approximately 2 seconds to reduce nozzle blockage.