Brake Cleaner Spray 400ml, Disc & Drum Brake Degreaser

What is JENOLITE Brake Cleaner?

It is a heavy-duty aerosol solvent cleaner designed to remove brake dust, grease, oil, brake-fluid residue and road contamination from suitable vehicle braking components.

Can I use it on brake discs?

Yes. Disc brakes are one of the intended applications.

Can I use it on brake calipers?

Yes. It is suitable for cleaning calipers before maintenance, servicing or appropriate refinishing.

Can I use it on drum brakes?

Yes. Drum brake cleaning is an intended application.

Can it be used on brake shoes?

Yes. The Jenolite specification includes brake shoes.

Can it be used on brake linings?

Yes. Brake linings are included among the intended applications.

Can it be used on motorcycles?

Yes. Jenolite specifically confirms motorcycle brake use.

Does it remove brake dust?

Yes.

Does it remove grease?

Yes. It is designed to dissolve greasy and oily deposits.

Can it remove brake fluid residue?

Yes, it is designed to remove suitable brake-fluid contamination from compatible surfaces.

Does Brake Cleaner leave a residue?

It is formulated to evaporate without leaving unwanted cleaner residue.

Do I need to rinse it with water?

No water rinse is normally required. Allow the solvent to evaporate fully.

Do I need to dismantle the brakes first?

Not necessarily for accessible routine cleaning. The spray can clean many components without dismantling, although proper servicing may still require disassembly.

Can I use it before painting brake calipers?

Yes, it is useful for removing grease, brake dust and contamination during caliper preparation. Allow the cleaner to evaporate completely before painting.

Will it remove paint?

It may damage or strip painted surfaces, so keep overspray away from paintwork and decorative coatings.

Can I spray it on hot brakes?

No. Allow the braking system to cool first.

Why can't I spray it on hot brakes?

The product is an extremely flammable aerosol and must be kept away from hot surfaces and ignition sources.

Can it fix squealing brakes?

Cleaning away contamination may help where noise is caused by dirt or deposits, but squealing can also be caused by worn pads, glazing, vibration or mechanical faults. Brake Cleaner should not be presented as a guaranteed cure for brake noise.

Does it improve braking performance?

Removing oil, grease and contamination helps restore clean braking surfaces, but Brake Cleaner does not repair worn or faulty brakes.

Can it fix brakes contaminated with oil?

It can help remove oily contamination, but heavily contaminated friction materials may need professional assessment or replacement.

Can it be used on clutch components?

“Brake and clutch cleaner” is a relevant search use, but use should be limited to suitable compatible components and surfaces. Do not spray indiscriminately onto clutch friction materials or seals without confirming suitability.

Can it be used on plastic?

Do not assume compatibility. Strong solvents can affect some plastics, so keep overspray off sensitive plastic parts unless suitability is known.

Can it be used on rubber?

Avoid unnecessary contact with seals, boots and rubber components unless compatibility has been confirmed.

Can I use it on alloy wheels?

It is not a wheel cleaner. Avoid overspray on painted, lacquered or decorative wheel finishes.

Can it clean an entire engine?

No. Use an engine cleaner/degreaser for broader engine cleaning.

Is it flammable?

Yes. It is classified as an extremely flammable aerosol.

Should I wear gloves?

Protective gloves and eye protection are advisable, and the SDS specifies appropriate PPE and good ventilation.

Can I use it indoors?

Only with very good ventilation. Outdoor use is preferable where practical.

Step 1 – Let the Brakes Cool

Never spray onto hot brake components.

Allow the vehicle and braking system to cool completely before starting.

Step 2 – Work Safely

Work outdoors or in a very well-ventilated area.

Keep the aerosol away from:

• Flames
• Sparks
• Hot surfaces
• Smoking
• Other ignition sources

The product is extremely flammable. Jenolite

Step 3 – Position a Drip Tray

Place a suitable tray beneath the component to collect dissolved contamination and cleaner runoff.

Do not allow contaminated cleaner to enter drains or watercourses.

Step 4 – Shake Well

Hold the aerosol upright and shake thoroughly before use.

Step 5 – Spray the Component

Spray liberally onto the area to be cleaned.

Allow the solvent to dissolve:

• Brake dust
• Grease
• Oil
• Brake fluid residue
• Road grime
• Oily contamination

Step 6 – Agitate if Required

For stubborn deposits, use a suitable brush to loosen the contamination.

Step 7 – Flush Again

Spray again until the contamination has been removed.

Step 8 – Wipe Excess

Use a soft, clean cloth where necessary to remove excess contaminated liquid.

Step 9 – Allow to Evaporate

Allow the cleaner and vapours to evaporate completely before the vehicle is operated.

Step 10 – Check the Braking System

Ensure braking components are correctly assembled, clean and dry before returning the vehicle to use.

Brake Cleaner does not replace mechanical inspection where there is:

• Excessive wear
• Damage
• Fluid leakage
• Warping
• Binding
• Persistent noise
• Reduced braking effectiveness

Step 11 – Clear the Nozzle

After use:

Invert the aerosol and spray for approximately 2 seconds to help prevent nozzle blockage.